Maintenance
Maintenance Manual 76
Removing an AC SPD
1. Open the front door. See “Opening a Front Door” on page 20.
2. Remove the safety cover. See “Removing a Safety Cover” on page 34.
3. Loosen the captive screws securing the wires.
4. Pull out the wires from the AC SPD.
Figure 98. Disconnecting the Wires
5. Push down on the top of the AC SPD release tab with your finger. As the AC SPD releases, lift
the bottom of the AC SPD.
6. Remove the AC SPD from the rail.
Figure 99. Removing an AC SPD
To Next Page
Loading...
