Delta PCS100 - Page 93

Maintenance
Maintenance Manual 81
Removing an E Board
1. Open the front door. See “Opening a Front Door” on page 20.
2. Remove the safety cover. See “Removing a Safety Cover” on page 34.
3. Remove the screws securing the E board and the wires.
4. Remove the E board and the wires.
Figure 104. Removing an E Board and Wires
Installing an E Board
1. Align the wires and E board with the holes on the chassis.
2. Secure the E board and wires with screws.
Figure 105. Installing an E Board and Wires
3. Installing a safety cover. See “Installing a Safety Cover” on page 37.
4. Close the front door. See “Closing a Front Door” on page 22.
ON
OFF
ON
OFF
E BD
ON
OFF
ON
OFF
E BD