Delta RPI M50A

107
Installation and Operation Manual for Inverter RPI M50A_12s V1 EU EN 2017-03-09
8 Settings
Reactive Power Ctrl
Active Power Ctrl
4. Use the and buttons to select the Active Power Ctrl entry and then press the
ENT
button.
P(V)
Power vs. Frequency
Power Limit
5. Use the and buttons to select the Power Limit entry and then press the
ENT
button.
Setting the mode
Set Point: 100%
Mode: ON
6. Use the and buttons to select the Mode entry and then press the
ENT
button.
→ The shape of the arrow changes
, the value can be changed.
The currently set mode is displayed after the entry.
7. Use the and buttons to select a mode and then press the
EXIT
button.
Changing the settings
Set Point: 100%
Mode: ON
8. Use the and buttons to select a parameter and then press the
ENT
button.
→ The shape of the arrow changes
, the parameter can be changed.
The currently set value is displayed after the entry.
9. Use the and buttons to configure the value and then press the
ENT
button.