63
Installation and Operation Manual for Inverter RPI M50A_12s V1 EU EN 2017-03-09
6 Installation
The colors of the wires in the connection example
correspond to a standard CAT5 cable and may
differ in other cables. The wire colors have no
effect on the function of the wiring.
1. Connect the wires according to the desired connection
diagram.
2. After commissioning, the relays can be defined as make-con-
tact or break-contact for the external shutdown on the display
(see “8.4.8 EPO (External power-off )”, page 101).
To Next Page
Loading...
Need help?
General
