69
Installation and Operation Manual for Inverter RPI M50A_12s V1 EU EN 2017-03-09
6 Installation
6. Turn the AC/DC disconnector to the OFF position.
7. Remove the sealing cap from the AC connection and store
in a safe place.
8. Plug the AC plug into the AC connection on the inverter and
twist tight.
9. Fasten the AC cable with a strain relief element.
10. If the inverter is connected to a grid without a neutral
conductor, the AC connection must be changed using the
display to 3P3W after commissioning, see “8.4.9 AC con-
nection”, page 102.
t
To Next Page
Loading...
Need help?
General
