Delta RPI M50A

8 Settings
Installation and Operation Manual for Inverter RPI M50A_12s V1 EU EN 2017-03-09
90
Freq. Protection
Reconnect T: 600s
P Ramp up: 6000%/m
Voltage Protection
5. Use the and buttons to select the Voltage Protection entry and then press
the
ENT
button.
High On: 259.0V
High Off T: 0.3s
Low Off: 104.0V
High Off: 276.0V
6. Use the and buttons to select a parameter and then press the
ENT
button.
→ The shape of the arrow changes
, the value can be changed.
The currently set value is displayed after the entry.
7. Use the and buttons to configure the value and then press the
ENT
button.