Erect, assemble and connect F800
30 PR-2013-0105-GB • Subject to modifications • R2-04/2016
4.4 Assemble remote control (optionally)
The faultless function of the humidity switch (integrated in the
remote control) is ensured by assembly which largely prevents
the external influences of the controller: for the assembly pro-
ceed as follows:
• Mount remote control at a height of 1.5 to 1.8 m and at least
about 1 m distant from doors, windows and radiators.
• Open casing, mark screw connection holes, and mount with
mounting materials suitable for the wall.
• Avoid direct solar radiation, contact with cold walls or com-
ponents as well as direct blowing by the F800.
• Protect the remote control from splashing water!
Fig. 4-35
To Next Page
Loading...