Shipping and Storage F800
14 PR-2013-0105-GB • Subject to modifications • R2-04/2016
3 Shipping and Storage
3.1 Delivery
The units are delivered standing in cardboard packaging on pallets.
• When the unit is delivered, check that the shipment is correct according to the
despatch note, and also check for completeness.
What steps should you
should take in the event of
shipping damage?
The exterior of the packaging is damaged
1 Unpack the equipment in the presence of the lorry driver and have him confirm the
damage on the shipping order.
2 Inform the DencoHappel Sales Company immediately.
Exterior packaging is O.K., contents are damaged.
1 Once you have established the extent of the damage, report the damage to the
DencoHappel Sales Company in writing.
2 Take photographs of the damaged parts.
3 Possible shipping damage must be reported no later than 4 days after delivery.
It will not be possible to process claims if the above-mentioned points are not fulfilled.
In both cases, consult the DencoHappel Sales Company installing the units.
3.2 Transport
•
For safety reasons, wear gloves and safety footwear when lifting or transporting the
unit.
NOTICE!
Consider instructions relating to the procedures in case of shipping damage provided
on the unit packaging or in despatch documents!
NOTICE!
Transport the unit only in its original packing.
Only remove the original packaging just before installation.
PERSONAL INJURY!
Conduct the transportation with at least three persons in order to avoid injuries or
damages.
The weight with maximum accessories can be about 122 kg!
DAMAGE TO THE UNIT!
– The unit may be not tipped more than 45° when being transported to its installa-
tion site.
– The unit may not be transported in a lying position.