Maintenance, Cleaning and Troubleshooting F800
34 PR-2013-0105-GB • Subject to modifications • R2-04/2016
6 Maintenance, Cleaning and Troubleshooting
6.1 Maintenance
Recommendation
Maintenance Agreement
We recommend that you conclude a Maintenance Agreement with your installer/spe-
cialized firm or with DencoHappel. This way you can ensure that possible faults recog-
nized and eliminated at an early stage.
Maintenance
Pool water pump
The pool water pump is maintenance-free.
In order to ensure fault-free operation of the pump, the on-site non-return valves and
filters must be regularly cleaned according to the maintenance instructions.
6.2 Cleaning
6.2.1 Clean enclosure
• Clean the enclosure of the F800 with a soft cloth, possibly using a gentle cleaning
agent.
6.2.2 Clean/exchange air filter
Check every 3 months Check at least every 3 months whether the air filter is soiled, and clean or replace it if
necessary.
The filter is located behind the air intake grille of the unit. Proceed to clean/replace the
the filter as follows:
• Grip into the air intake grille, push it upwards, tip downwards
and remove.
NOTICE!
Do not clean the casing of the F800 with aggressive
cleaning agents!
To Next Page
Loading...