Denon AVR-1312 User Manual

20
nTuner (FM/AM) operation
Operation buttons Function
SEARCH RDS search
BAND FM/AM switching
MEMORY Preset memory registration
SHIFT Preset channel block selection
MODE Switch search modes
CH +, – Preset channel selection
TUNING df
Tuning (up/down)
MENU Amp menu
uio p
Cursor operation
ENTER Enter
RETURN B
Return
RT (Radio Text)
RT allows RDS stations to send text messages that appear on the
display.
“RT” appears on the display when radio text data is received.
1
Press TUNER to switch the input
source to “TUNER”.
2
Press SEARCH to select “RT”.
[ TUNING / ]
[
CH+/- ]
Tuning
Preset
[
BAND ]
[
MEMORY ]
Band
Memory [ SEARCH ] RDS
[
MODE ] Mode
RDS
RDS
PTY
TP
RT
RDS Station
Program category
Traffic info.
Radio Text ON
FM 87.50MHz
TUNER
•While receiving an RDS broadcast station, the text data broadcast
from the station is displayed.
•To turn the display off, press o p.
•If no text data is being broadcast, “NO TEXT DATA” is displayed.
Tuning in radio stations
Basic version
Advanced version
Information
Basic version
BD

Denon AVR-1312 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Amplification Type	Discrete
Input Sensitivity	200 mV
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Signal-To-Noise Ratio	98 dB
Digital Optical Inputs	2
Coaxial Digital Input	1
Analog Audio Inputs	4
Headphone Jack	Yes
Tuner Presets	56
Dimensions (W x H x D)	434 x 151 x 319 mm
Amplifier Type	Discrete
Tuner Type	AM/FM
Preset Stations	56
Remote Control	Yes
Dolby Technologies	Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD
DTS Technologies	DTS-HD Master Audio
Output Power / Channel	75 W (8 Ohms, 20 Hz - 20 kHz, 2 channels driven, THD 0.08%)
Input Impedance	47 kOhms
Audio Inputs	2 Optical, 1 Coaxial, 4 Analog
Power Output	75W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)