11
Playback (Basic operation)
 n Playing a Blu-ray Disc player/DVD player 
(vpage12)
 n Playing a portable player (vpage12)
 n Playing an iPod (vpage13)
 n Tuning in radio stations (vpage17)
Selecting a listening mode (Surround mode) 
(vpage21)
 n Selecting the input source (vpage11)
 n Adjusting the master volume (vpage11)
 n Turning off the sound temporarily (vpage11)
Playback (Advanced operation) (vpage28)
Important information
Before starting playback, make the connections between the different 
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices 
when playing them.
Selecting the input source
Press the input source select button 
(BD, DVD, TV, SAT/CBL, TUNER, 
DOCK, GAME, V.AUX) to be played 
back.
The desired input source can be selected 
directly.
You can also use the following operation to select an input 
source.
 nUsing the button on the main unit
Press SOURCE d or SOURCE f.
•Every time you press SOURCE d or SOURCE f, the input source 
switches in the following order.
BDDVD TUNER DOCK
TV V.AUXSAT/CBL GAME
•When  iPod  1 on the main unit is pressed, the input source 
of this unit is switched to “DOCK” and the connected iPod is 
automatically played (vpage16 “iPod play function”).
Adjusting the master volume
Use M df to adjust the volume. 
 n When the “Volume Display” setting 
(vpage36) is “Relative”
GAdjustable rangeH 
– – –
 
–80.5dB – 18.0dB
 n When the “Volume Display” setting (vpage36) is 
“Absolute”
GAdjustable rangeH 
0.0 – 99.0
•The variable range differs according to the input signal and channel 
level setting.
You can also operate via the main unit. In this case, perform the 
following operations. 
Turn MASTER VOLUME to adjust the volume.
Turning off the sound temporarily
Press N.
•The power indicator flashes green.
•“MUTE” indicator on the display lights.
•
 appears on a TV screen.
•The sound is reduced to the level set at “Mute Level” (vpage36). 
•To cancel, press N again. Muting can also be canceled by adjusting 
the master volume.