Denon AVR-1312 User Manual

30
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
How to make detailed settings
Setting items Detailed items Description Page
Speaker Setup Speaker Config. Selects speaker configuration and size (bass reproduction capability).
C 5
Bass Setting Sets subwoofer and LFE signal range playback.
C 6
Distance Sets distance from listening position to speakers.
C 6
Channel Level Sets the volume of the test tone to be the same when it is output from each
speaker.
C 7
Crossover Freq. Sets the maximum frequency of the bass signal output from each channel to
the subwoofer.
C 8
Input Setup
Displayed items of the “Input Setup”
menu differs, depending on the selected
input source.
Input Assign Changes input connector assignment.
33
Auto Preset Uses the auto preset function to program radio stations.
34
Preset Skip Sets the preset memories that you do not want to display when tuning.
34
Video Select Video of another input source is played back combined with the playing audio.
34
Input Mode Sets the audio input mode and decode mode.
34
Source Level Adjusts the playback level of the audio input.
35
Playback Mode Makes settings for iPod playback.
35
Option Setup Volume Control Sets the volume setting.
36
Other Setup Makes various other settings.
37
Audio Adjust Adjusts surround sound parameters.
38
Tone Adjusts the tonal quality of the sound.
40
NIGHT MODE Optimized setting for late-night listening.
Compress dynamic range (difference between loud and soft sounds).
40
RESTORER Expands the lower and higher regions of compressed audio to enable richer
audio playback.
41
Audio Delay Compensates for incorrect timing between video and audio.
41
Speaker Setup
Input Setup
Option Setup
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
[ ][ENTER] Enter Return
MENU
Items that only need to be set
once
Set these for example upon purchase.
Once these items are set, there is
no need to set them again unless
the speaker layout or the connected
speakers have been changed.
Basic version
Advanced version
Information
Advanced version
BD

Denon AVR-1312 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Amplification Type	Discrete
Input Sensitivity	200 mV
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Signal-To-Noise Ratio	98 dB
Digital Optical Inputs	2
Coaxial Digital Input	1
Analog Audio Inputs	4
Headphone Jack	Yes
Tuner Presets	56
Dimensions (W x H x D)	434 x 151 x 319 mm
Amplifier Type	Discrete
Tuner Type	AM/FM
Preset Stations	56
Remote Control	Yes
Dolby Technologies	Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD
DTS Technologies	DTS-HD Master Audio
Output Power / Channel	75 W (8 Ohms, 20 Hz - 20 kHz, 2 channels driven, THD 0.08%)
Input Impedance	47 kOhms
Audio Inputs	2 Optical, 1 Coaxial, 4 Analog
Power Output	75W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)