Denon AVR-1312 User Manual

21
•Some listening modes cannot be selected, depending on the audio
format or number of channels of the input signal. For details, see
“Types of input signals, and corresponding surround modes”
(vpage53).
•Adjust the sound field effect with the menu “Audio Adjust”
(vpage38) to enjoy your favorite sound mode.
•Buttons on the remote control unit can be
used for operations.
Press
SURROUND 0 or SURROUND 1 and
the modes are switched as shown below.
DIRECT STEREO PLg (or PLgx)
z
DTS NEO:6
z
MULTI CH STEREO
z
VIRTUAL
z
z The display varies depending on the audio format or the number of
channels of input signals.
Selecting a listening mode (Surround mode)
This unit can play input audio signals in multi-channel surround mode or in stereo mode.
Select a listening mode suitable for the playback contents (cinema, music, etc.) or according to your liking.
Listening Mode
Input audio
signal
Playback Listening mode
2-channel
Multi channel
Surround
Standard playback
(vpage22)
For 2-channel signal input:
•Surround-channel signals are created and played with surround playback.
For multichannel signal input:
•The surround signal recorded in source is played as surround playback.
(The sound is played according to the settings of the speaker size in
C page 5 “Speaker Config.”.)
•Surround-back-channel signals that are not recorded in source can be
created.
2-channel
Multi channel
Surround
Multi channel
stereo playback
(vpage23)
This mode is for enjoying stereo sound from all speakers.
2-channel
Multi channel
Surround
Virtual playback
(vpage23)
This mode is for enjoying surround effects using only the front speakers
or headphones.
2-channel
Multi channel
Stereo
Stereo playback
(vpage23)
•If multichannel signals are input, they are mixed down to 2-channel audio
and are played.
•Subwoofer signals are also output.
2-channel
Multi channel
Stereo
Surround
Direct playback
(vpage23)
Sound recorded in source is played as is.
•Surround back signals are not created.
•In this mode, the following items cannot be adjusted.
•Tone (vpage40) •RESTORER (vpage41)
Basic version
Advanced version
Information
Basic version

Denon AVR-1312 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Amplification Type	Discrete
Input Sensitivity	200 mV
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Signal-To-Noise Ratio	98 dB
Digital Optical Inputs	2
Coaxial Digital Input	1
Analog Audio Inputs	4
Headphone Jack	Yes
Tuner Presets	56
Dimensions (W x H x D)	434 x 151 x 319 mm
Amplifier Type	Discrete
Tuner Type	AM/FM
Preset Stations	56
Remote Control	Yes
Dolby Technologies	Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD
DTS Technologies	DTS-HD Master Audio
Output Power / Channel	75 W (8 Ohms, 20 Hz - 20 kHz, 2 channels driven, THD 0.08%)
Input Impedance	47 kOhms
Audio Inputs	2 Optical, 1 Coaxial, 4 Analog
Power Output	75W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)