Denon AVR-1312 User Manual

41
Adjusting the sound field effects
RESTORER
around items indicate the settings made upon purchase.
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
Press RESTORER to select “ON” or “OFF”.
RESTORER:OFF
ON Use RESTORER.
OFF Do not use RESTORER.
•This can also be set by pressing
RESTORER on the main unit.
•This item can be set with analog signals or when a PCM signal (fs = 44.1/48 kHz) is input.
•This cannot be set when the surround mode is set to “DIRECT”.
•This item default setting for “iPod” is “ON”. All others are set to “OFF”.
•When set to “ON”, is displayed.
•If you do not press any button for approximately 5 seconds, the menu screen light turns off.
Audio Delay
around items indicate the settings made upon purchase.
While viewing video, manually adjust the time to delay audio output.
Use AUDIO DELAY +, – to select the value to be set.
Audio Delay : 0ms
0ms
–
200ms
Store “Audio Delay” for each input source.
Basic version
Advanced version
Information
Advanced version
BD

Denon AVR-1312 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Amplification Type	Discrete
Input Sensitivity	200 mV
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Signal-To-Noise Ratio	98 dB
Digital Optical Inputs	2
Coaxial Digital Input	1
Analog Audio Inputs	4
Headphone Jack	Yes
Tuner Presets	56
Dimensions (W x H x D)	434 x 151 x 319 mm
Amplifier Type	Discrete
Tuner Type	AM/FM
Preset Stations	56
Remote Control	Yes
Dolby Technologies	Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD
DTS Technologies	DTS-HD Master Audio
Output Power / Channel	75 W (8 Ohms, 20 Hz - 20 kHz, 2 channels driven, THD 0.08%)
Input Impedance	47 kOhms
Audio Inputs	2 Optical, 1 Coaxial, 4 Analog
Power Output	75W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)