Denon AVR-1707 Operating Instructions

MeasuresCauseExample
Easy Setup Procedure Easy Setup Procedure
ENGLISH
12
ENGLISH
q The speakers required for producing suitable reproduction
have not been detected.
• Check that the pertinent speakers are properly
connected.
w The speaker polarity is connected in reverse.
• Check the polarity of the pertinent speakers.
• For some speakers, the screen below may be
displayed even though the speakers are properly
connected.
If so, select “Skip
0 ”.
Error messages
An error message is displayed if the measurements could not be
completed automatically due to the speaker layout, the measuring
environment, etc. Please check the following matters, reset the
pertinent items, and measure again.
Be sure to turn off the AVR-1707’s power before checking the speaker
connections.
C a u t i o n : S P N o n e
F L
C a u t i o n : P h a s e
F L / R
e When accurate measurements cannot be made due to
the input level of the microphone being too high.
• Set up the speakers so that their position is farther
away from the listening position.
• Lower the volume of the subwoofer speaker.
C a u t i o n
O v e r l o a d < E x i t
Press
DD HH
to select the items, then press
FF
.

Denon AVR-1707 Specifications

General

Speakers connectivity type	-
Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Total Harmonic Distortion (THD)	0.7 %
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	75 W
Product color	Silver
Audio decoders	DTS, DTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital, Dolby Digital EX, Dolby Pro Logic II, Dolby Pro Logic IIx
Apple docking compatibility	iPod
Digital Signal Processing (DSP)	Yes
HDMI in	0
Digital audio optical in	2
Component video (YPbPr/YCbCr) in	3
Optical drive included	No

Weight and Dimensions

Depth	417 mm
Width	434 mm
Height	147 mm
Weight	11400 g