EasyManuals Logo

Denon AVR-1707 Operating Instructions

Denon AVR-1707
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
ENGLISH
21
ENGLISH
Sources recorded in stereo
Sources recorded in monaural
DIRECT / STEREO
•Effective for achieving pure playback.
If there is no need for tone control or distribution of the low
frequencies in function of the speaker configuration, select
the DIRECT mode to achieve the best sound quality.
DENON Original Surround Modes ( page 28, 29)
Select these for 7.1-channel playback with sources
recorded in stereo or monaural.
The effects are different for each of the surround modes.
Select the one most suited for the source being used.
DTS NEO:6 ( page 24)
This is a surround mode for playing 6.1- or 7.1-channel
stereo sources developed by Digital Theater Systems.
One of 2 playing modes, MUSIC (for music sources) or
CINEMA (for movie sources), can be selected according to
your preferences.
DOLBY PRO LOGIC IIx
*
( page 23)
Developed by Dolby Laboratories, this surround mode
provides 7.1-channel surround sound with conventional
stereo (2-channel) sources.
Select CINEMA mode for movie surround soundtracks,
MUSIC for music sources, and GAME for 2-channel game
box audio sources.
Basic Operation Basic Operation
Surround modes marked with an asterisk (*) cannot be used when
the surround back speaker is set to “NONE”.
The “+PLII x Cinema” mode cannot be selected when only one
surround back speaker is being used.
¢ DIRECT mode
This mode is for playing with high quality sound. The audio signals are
transmitted directly, without passing through the tone circuits, etc.
Selecting the play mode (DIRECT/STEREO)
The AVR-1707 is equipped with two 2-channel playback modes
exclusively for music. Select the mode to suit your tastes.
Press
[
DIRECT/STEREO
]
to select “DIRECT”.
STEREODIRECT
¢ STEREO mode
Use this mode to adjust the tone and achieve the desired sound.
Press
[
DIRECT/STEREO
]
to select “STEREO”.
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
ENTER
STATUS
D H F G
INPUT MODE
D H F G
SURROUND
PARAMETER
[STANDARD]
[DIRECT/STEREO]
ENTER
SURROUND PARAMETER D H
STATUS
F G, ENTER
INPUT MODE

Table of Contents

Other manuals for Denon AVR-1707

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-1707 and is the answer not in the manual?

Denon AVR-1707 Specifications

General IconGeneral
Speakers connectivity type-
Receiver typeSurround
Frequency range10 - 100000 Hz
Audio output channels7.1 channels
Audio A/D Converter (ADC)24-bit/96kHz
Total Harmonic Distortion (THD)0.7 %
Power output per channel (1KHz@6 Ohm)110 W
Power output per channel (20-20KHz@8 Ohm)75 W
Product colorSilver
Audio decodersDTS, DTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital, Dolby Digital EX, Dolby Pro Logic II, Dolby Pro Logic IIx
Apple docking compatibilityiPod
Digital Signal Processing (DSP)Yes
HDMI in0
Digital audio optical in2
Component video (YPbPr/YCbCr) in3
Optical drive includedNo
Weight and Dimensions IconWeight and Dimensions
Depth417 mm
Width434 mm
Height147 mm
Weight11400 g

Related product manuals