ENGLISH
(Audio]
SymJrte»!i
cauSe
COu
.........
Jimt';~',
".
page
No
sound
is
•
You
are playing a monaural
•
The
mode
is
set to something 30
produced from source
(TV,
AM radio broadcast. other than "STANDARD (Dolby/
center speaker. etc.)
in
the
STANDARD
(Dolby/
DTS
Surround)
'.'
DTS
Surround) mode.
No sound
•
The
surround mode
is
set to
• Set
to a surround playback 30
is
produced "STEREO'; or "DIRECT'.' mode.
from surround
speakers.
No
sound
is
•
The
surround back speaker's
• Check the setting
and
change it
27
produced from power amplifier
is
assigned to a
as
necessary.
surround
back
different channel.
speaker.
• Surround
back
speaker setting
is
• Set
to
something other than
23
set to "None': "None'.'
• Surround mode not set
to
a mode
• Select
a
surround playback
29,
30
for
6.1-
or
7.1-channel
playback. mode.
No sound
is
• Subwoofer's power not turned •
Turn
on
the subwoofer's power.
-
produced from
on.
subwoofer.
• The
"Subwoofer" setting
at
• Set to
"Yes'.'
23
"Speaker configuration"
is
set to
"No'.'
•
The
subwoofer
is
not properly
• Check the connections. 9
connected.
•
The
subwoofer's volume
is
• Adjust the subwoofer's
volume
41
turned off.
to
an
appropriate level.
No test tones
are
• Surround
mode
not set to
• Set to the
STANDARD
mode.
29
produced when
"STANDARD'.'
main remote
control unit's
TEST
button
is
pressed.
DTS
sound
is
not
•
DVD
player's audio output setting • Set the
DVD
player.
For
details,
-
output.
is
not set to bitstream. refer
to the
DVD
player's
operating instructions.
·DVD player
is
not compatible
• Use a DTS-compatible player.
-
with
DTS
sound playback.
•
The
AVR-1708's
"Input Mode"
• Set
to
the
"Auto"
or
"OTS"
35
setting
is
set to
other than mode.
"OTS'.'
HDMI audio
•
The
audio signal
input
to
the
10
signals
are
not HOMI input terminal cannot
be
output from
-
played
on
the AVR-1708. Input
speakers. the audio signal to the digital
audio input terminal or analog
audio input terminal.
No sound
is
• HOMI input setting
is
improper.
• Check the HOMI input setting.
25
output from
the monitor
connected
with
HOMI
connections.
(Video)
SymptOm
..
'
Ca~
.,
,CQunterme8sUre
.
"'~
No picture
• The connections
between the
• Check the connections.
10
~
17
appears.
AVR-1708 and monitor are faulty.
• The
monitor's
input setting
is
• Set properly.
-
wrong.
• The player
is
connected using the
• High definition (1080i/720p) and
-
component input connectors, the progressive
(480p/576p) video
monitor
is
connected using the
signals
are
not down-converted.
video (yellow) or S-Video output
Set
the player to interlace
connectors.
(480i/576i) signals.
No picture
•
The
connections to the HOMI • Check the connections.
10
appears
connectors
are
faulty.
with
HOMI
• HOMI input setting
is
improper. • Check the HDMI input setting.
25
connections.
• The monitor
is
not compatible
• Connect
a
monitor that
is
10
with copyright protection
compatible with copyright
(HOCP).
protection
(HOCP).
• The HOMI format of the player
• Match the HOMI format of the
10
and monitor do not match.
player
and
monitor.
Picture cannot
be
• Input
source
does not
match
•
The
video conversion
function
13
recorded.
recorder's video connection does not work for
the
REC
connector (video or S-Video).
OUT
connectors. Match the
input source
and
recorder
connections.
OVOs
cannot
be
• This
is
not a malfunction.
Most
-
copied
on
a
VCR.
movie software includes
copy
-
prevention signals
and
cannot
be
copied.
58
To Next Page
Loading...
