28
Getting Started Connections Playback Remote Control Information Troubleshooting Specifi cations
ENGLISH
Multi-Zone
Setting items Setting contents
Auto Lip Sync
Automatic compensation
for timing shift in audio and
video output.
ON : Compensated.
OFF : Not compensated.
HDMI Audio Out
Select HDMI audio output
device.
Amp : Use speakers connected to AVR-1910 for audio playback.
TV : Use speakers of TV for audio playback.
NOTE
When the HDMI control function is operating, the setting of audio playback
in the connected TV takes priority (vpage 49 “Controlling HDMI-
compatible devices from the AVR-1910 (HDMI Control Function)”).
HDMI Control
External devices can be
controlled from the AVR-
1910 and the AVR-1910 can
be controlled from external
devices.
NOTE
The HDMI control
function controls
operations of a TV that
is compatible with the
HDMI control function.
Make sure that the TV
and HDMI are connected
when you perform HDMI
control.
ON : Use the HDMI control function.
OFF : Do not use the HDMI control function.
• Please consult the operating instructions for each connected device
to check the settings.
• For details on the HDMI control function, see “Controlling HDMI-
compatible devices from the AVR-1910 (HDMI Control Function)”
(vpage 49).
NOTE
• When “HDMI Control” is set to “ON”, it consumes more standby
power.
• When not using this unit for a long period, we recommend that you press
to turn off (jOFF) the power.
• When the “HDMI Control” setting has been changed, always turn off the
power to the connecting devices afterwards and then turn back on.
• The “HDMI Control” does not work when the power to the equipment is
off.
• When “HDMI Control” is set to “ON”, power is supplied constantly to the
AC outlet (UNSWITCHED).
Standby Source
Set the HDMI connector for
HDMI signal input during
standby.
This can be set when
“HDMI Control” is set
to “ON”.
Last : Standby with last used input source during power on.
HDMI1 / HDMI2 / HDMI3 / HDMI4 : The standby mode is set at the input
source assigned to the respective.
Make settings for HDMI video/audio output.
Making the HDMI settings(HDMI Setup)
Default settings are underlined.
Setting items Setting contents
Power Off Control
The power of the AVR-1910
and external device turn off
together.
This can be set when
“HDMI Control” is set
to “ON”.
ON：Switched.
OFF：Not switched.
• Please consult the operating instructions for each connected device
to check the settings.
• For details on the HDMI control function, see “Controlling HDMI-
compatible devices from the AVR-1910 (HDMI Control Function)”
(vpage 49).
Making detailed settings (Manual Setup)
: Moves the cursor (Up/Down/Left/Right)
: Decision the setting
: Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
