40
ENGLISH
Recalling preset stations
• To call out preset stations from the remote control unit.
1
Watching the display, press
the SHIFT button to select
the preset memory block.
(Remote control unit)
2
Watching the display, press
the CHANNEL + or – button
to select the desired preset
channel.
(Remote control unit)
• Calling out preset stations from the main unit‘s panel.
1
Press the TUNING PRESET
button.
(Main unit)
2
Turn the FUNCTION knob
and select the desired
station.
(Main unit)
RDS (Radio Data System)
RDS (works only on the FM band) is a broadcasting service which allows station to send additional information
along with the regular radio program signal.
The following three types of RDS information can be received on this unit:
2 Program Type (PTY)
PTY identifies the type of RDS program.
The program types and their displays are as follows:
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
DRAMA
CULTURE
SCIENCE
VARIED
POP M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
NATION M
OLDIES
FOLK M
DOCUMENT
News
Current Affairs
Information
Sports
Education
Rock Music
Easy Listening
Music
Light Classical
Serious
Classical
Other Music
Phone In
Travel
Leisure
Jazz Music
Country Music
2 Traffic Program (TP)
TP identifies programs that carry traffic announcements.
This allows you to easily find out the latest traffic conditions in your area before you leaving home.
2 Radio Text (RT)
RT allows the RDS station to send text messages that appear on the display.
NOTE: The operations described below using the RDS, PTY and RT buttons will not function in areas in which
there are no RDS broadcasts.
Drama
Culture
Science
Varied
Pop Music
Weather
Finance
Children’s
programmes
Social Affairs
Religion
National Music
Oldies Music
Folk Music
Documentary
RDS search
Use this function to automatically tune to FM stations that provide RDS service.
1
Set the input function to
“TUNER”.
(Remote control unit)
3
Press the CHANNEL + (UP)
or – (DOWN) button to
automatically begin the RDS
search operation.
(Remote control unit)
2
Press the RDS button until
“RDS SEARCH” appears on
the display.
(Remote control unit)
If no RDS stations is found with above
operation, all the reception band are searched.
4
When a broadcast station is found, that station's
name appears on the display.
5
To continue searching, repeat step 3.
If no other RDS station is found when all the
frequencies are searched, “NO RDS” is
displayed.
The main unit’s display switches as follows
each time the RDS buttons are pressed.
RDS SEARCH PTY SEARCH
RT ON TP SEARCH
Display
This is the screen when operated.
This is the screen when operated.
To Next Page
Loading...
Need help?
General
