Denon AVR-3803

41
ENGLISH
PTY search
Use this function to find RDS stations broadcasting a designated program type (PTY).
For a description of each program type, refer to “Program Type (PTY)”.
TUNER
1
3
2
3
4
1
Set the input function to
“TUNER”.
(Remote control unit)
4
Press the CHANNEL + (UP)
or – (DOWN) button to
automatically begin the PTY
search operation.
(Remote control unit)
2
Press the RDS button until
“PTY SEARCH” appears on
the display.
(Remote control unit)
If there is no station broadcasting the
designated program type with above operation,
all the reception bands are searched.
5
The station name is displayed on the display
after searching stops.
6
To continue searching, repeat step 4.
If no other station broadcasting the designated
program type is found when all the frequencies
are searched, “NO PROGRAMME” is
displayed.
3
Watching the display, press
the 0 and 1 cursor buttons
to call out the desired
program type.
(Remote control unit)
TP search
Use this function to find RDS stations broadcasting traffic program (TP stations).
TUNER
1
2
3
1
Set the input function to
“TUNER”.
(Remote control unit)
3
Press the CHANNEL + (UP)
or – (DOWN) button TP
search begins.
(Remote control unit)
2
Press the RDS button until
“TP SEARCH” appears on
the display.
(Remote control unit)
If no TP station is found with above operation,
all the reception bands are searched.
4
The station name is displayed on the display
after searching stops.
5
To continue searching, repeat step 3.
If no other TP station is found when all the
frequencies are searched, “NO PROGRAMME”
is displayed.
The main unit’s display switches as follows
each time the RDS buttons are pressed.
RDS SEARCH PTY SEARCH
RT ON TP SEARCH
Display
This is the screen when operated.
This is the screen when operated.
This is the screen when operated.
The main unit’s display switches as follows
each time the RDS buttons are pressed.
RDS SEARCH PTY SEARCH
RT ON TP SEARCH
Display
This is the screen when operated.
This is the screen when operated.