Denon AVR-E300 User Manual

36
Listening to FM/AM broadcasts
n Changing the screen display duration
Make this setting at “Now Playing”
(vpage 93) in the menu. The default
setting is “Always On”.
When “Auto O” is set, the on-screen
display is turned o 30 seconds after an
operation.
Press uio p while the display is o to
return to the original screen.
n Adding to the FAVORITE STATION button
(vpage64)
Operations available through the OPTION button
Press the OPTION button to display a menu of functions that can be
used on the TV screen. Select the function you want to use from this
menu. You can easily find and use the desired function.
n Tuning in by entering the radio frequency
(Direct Tune) (vpage37)
n Presetting the current broadcast station
(Preset Memory) (vpage38)
n Changing the tuning mode (Tune Mode)
(vpage39)
n Tuning in to radio stations and presetting them
automatically (Auto Preset) (vpage40)
n Specify a name for the preset broadcast station
(Preset Name) (vpage41)
n Skipping preset broadcast stations
(Preset Skip) (vpage42)
n Displaying your desired video on the monitor during
audio playback (Video Select) (vpage66)
Basic instructions
Advanced instructions
Information
Basic instructions
DVD

Denon AVR-E300 Specifications

General

Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
3D Pass-through	Yes
Audio Return Channel (ARC)	Yes
Dolby TrueHD	Yes
DTS-HD Master Audio	Yes
Networking	No
AirPlay	No
Audyssey MultEQ	Yes
HDMI Pass-Through	Yes
Receiver Type	AV Receiver
HDMI Ports Quantity	5
Audio DAC	192 kHz / 24-bit
Digital Sound Processor (DSP)	Yes
Input Sensitivity	200 mV
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	98 dB
Tuner Bands	AM/FM
Amplifier Type	Discrete
Frequency Response	10 Hz - 100 kHz
Bluetooth	No
Wi-Fi	No
Output Power / Total	375 W
Input Impedance	47 kOhms
Video Inputs/Outputs	Composite
Audio Inputs/Outputs	Digital Optical
Power Output per Channel	75 W (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Power Output	75W (8 ohms, 20 Hz - 20 kHz, 0.08% THD, 2 channels driven)