2.3. About the error code
See the following table for details on the error code, details of the error code, display and coping strategies when updating
the rmware from DPMS. (DPMS:Denon Product Management Server).
Error
Code
Details of Error code Display Coping strategies
01 Failed to log in to DPMS.
L o g i n f a i l e d 0 1
Initialize the unit and try updating
again.
Update in an environment where there
is a small network load.
02
Line etc. is congested when log-
ging in to DPMS.
S e r v e r i s b u s y 0 2
Update in an environment where there
is a small network load.
03 Connection to DPMS failed.
C o n n e c t i o n F a i l 0 3
Check the network connection. Update
in an environment where there is a
small network load.
04
Firmware le data was requested
but error message was received.
C o n n e c t i o n F a i l 0 4
Check the network connection. Update
in an environment where there is a
small network load.
05
Firmware le data was requested
but it timed out.
C o n n e c t i o n F a i l 0 5
Check the network connection. Update
in an environment where there is a
small network load.
06
Firmware le data was requested
but error message was received.
C o n n e c t i o n F a i l 0 6
Check the network connection. Update
in an environment where there is a
small network load.
07
All rmware le information was
requested but a timeout occurred.
C o n n e c t i o n F a i l 0 7
Check the network connection. Update
in an environment where there is a
small network load.
08
Main CPU rmware le informa-
tion was requested but error mes-
sage was received.
C o n n e c t i o n F a i l 0 8
Check the network connection. Update
in an environment where there is a
small network load.
09
Main CPU rmware le informa-
tion was requested but error mes-
sage was received.
C o n n e c t i o n F a i l 0 9
Check the network connection. Update
in an environment where there is a
small network load.
0A
Error (NG) message was received
when rmware of Main CPU was
downloaded.
D o w n l o a d f a i l 0 A
Check the network connection. Update
in an environment where there is a
small network load.
0B
Error (line congestion) message
was received when rmware of
Main CPU was downloaded.
D o w n l o a d f a i l 0 B
Check the network connection. Update
in an environment where there is a
small network load.
0C
Error (connection failure) message
was received when rmware of
Main CPU was downloaded.
D o w n l o a d f a i l 0 C
Check the network connection. Update
in an environment where there is a
small network load.
0D
Received an invalid pacage ver-
sion.
D o w n l o a d f a i l 0 D
Check the network connection. Update
in an environment where there is a
small network load.
0E
Connection to DPMS failed.
(Cannot get NTP)
C o n n e c t i o n F a i l 0 E
Check the network connection. Update
in an environment where there is a
small network load.
10
Main CPU failed to receive rm-
ware for rewriting sent from
CX870 (when timed out).
U p d a t i n g f a i l 1 0
Turn on the power again. Update will
start automatically.
64
To Next Page
Loading...
Need help?
General
