Denon AVR-X2000 Service Manual

This unit is equipped with a sophisticated digital signal processing circuit that lets you play your favorite movie and music sources and listen to them with a wide range of surround sound mode choices. Sound modes and surround parameters This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode. Symbols in the table S
This indicates the audio output channels or surround parameters that can be set.
D
This indicates the audio output channels. The output channels depend on the settings of “Speaker Cong.”
Sound Mode
Channel output Surround Parameter
Front
L/R
Center
Surround
L/R
Surround back
L/R
Front height
L/R
Subwoofer Cinema EQ
Loudness
Management
z
2
Dynamic
Compression
z
3
Low Frequency
Effects
z
4
Delay Time
DIRECT/PURE DIRECT (2-channel) z
1
S
D
z
5
S S
DIRECT/PURE DIRECT (Multi- channel)
z
1
S D D
D
z
6
D
z
6
D S S S
STEREO
S D S S S
MULTI CH IN
S D D D
D
z
7
D
S
z
8
S
DOLBY PRO LOGIC
g
z
S D D
D
z
7
D S S S
DOLBY PRO LOGIC
g
x
S D D D D
S
z
9
S S
DOLBY PRO LOGIC
g
S D D D
S
z
10
S S
DTS NEO:6
S D D D D
S
z
9
S S
DOLBY DIGITAL
S D D D
D
z
7
D
S
z
8
S
DOLBY DIGITAL Plus
S D D D
D
z
7
D
S
z
8
S
DOLBY TrueHD
S D D D
D
z
7
D
S
z
8
S S S
DTS SURROUND
S D D D
D
z
7
D
S
z
8
S
DTS 96/24
S D D D
D
z
7
D
S
z
8
S
DTS-HD
S D D D
D
z
7
D
S
z
8
S
DTS Express
S D D D
D
z
7
D
S
z
8
S
MULTI CH STEREO
S D D D D D S S S
ROCK ARENA
S D D D D D S S S
JAZZ CLUB
S D D D D D S S S
MONO MOVIE
S D D D D D S S S
VIDEO GAME
S D D D D D S S S
MATRIX
S D D D D D S S S S
VIRTUAL
S D S S S
z
1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z
2 This item can be selected when a Dolby TrueHD signal is played.
z
3 This item can be selected when a Dolby Digital or DTS signal is played.
z
4 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z
5 Only when “Subwoofer Mode” is set to “LFE+Main” , sound is output from the subwoofer.
z
6 A signal for each channel contained in an input signal is output as audio.
z
7 Audio is output from the front height speaker when the set sound mode name contains “+PL
g
z”. For information on how to check the sound mode, see .
z
8 This setting is unavailable when the set sound mode name contains “+PL
g
x Music”. For information on how to check the sound mode, see .
z
9 This setting is possible when the sound mode is “PL
g
x Cinema” or “DTS NEO:6 Cinema”.
z
10 This setting is possible when the sound mode is “PL
g
Cinema”.
75

Denon AVR-X2000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Input sensitivity	200 mV
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	95 W
HDMI in	7
AC (power) in	Yes
Audio (L/R) in	4
Composite video in	2
Component video (YPbPr/YCbCr) in	1
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES, DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W

Weight and Dimensions

Depth	330 mm
Width	434 mm
Height	167 mm
Weight	9500 g