Denon AVR-X2000 Service Manual

Sound Mode
Surround Parameter
Subwoofer
Tone
z
12
Audyssey
Restorer
z
15
Effect Level Room Size
Height Gain
z
11
PRO LOGIC
g
/
g
x Music mode only
NEO:6 Music
mode only
Panorama Dimension Center Width Center Image
MultEQ
®
z
13
Dynamic EQ
z
14
Dynamic
Volume
z
14
DIRECT/PURE DIRECT (2-channel) z
1
S
z
5
DIRECT/PURE DIRECT (Multi- channel)
z
1
S
STEREO
S S S S S S
MULTI CH IN
S S S S S S
DOLBY PRO LOGIC
g
z
S S S S S S S
DOLBY PRO LOGIC
g
x
S S S S S S S S S
DOLBY PRO LOGIC
g
S S S S S S S S S
DTS NEO:6
S S S S S S S
DOLBY DIGITAL
S S S S S S
DOLBY DIGITAL Plus
S S S S S S
DOLBY TrueHD
S S S S S S
DTS SURROUND
S S S S S S
DTS 96/24
S S S S S S
DTS-HD
S S S S S S
DTS Express
S S S S S S
MULTI CH STEREO
S S S S S S
ROCK ARENA
S S S
S
z
16
S S S S
JAZZ CLUB
S S S S S S S S
MONO MOVIE
S S S S S S S S
VIDEO GAME
S S S S S S S S
MATRIX
S S S S S S
VIRTUAL
S S S S S S
z
1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z
5 Only when “Subwoofer Mode” is set to “LFE+Main” , sound is output from the subwoofer.
z
11 This setting is available when the set sound mode name contains “+PL
g
z”. For information on how to check the sound mode, see .
z
12 This item cannot be set when “Dynamic EQ” is set to “On”.
z
13 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.
z
14 This item cannot be set when “MultEQ
®
” is set to “Off” or “Graphic EQ”.
z
15 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z
16 In this sound mode, bass is +6 dB, and treble is +4 dB (Default).
76

Denon AVR-X2000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Input sensitivity	200 mV
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	95 W
HDMI in	7
AC (power) in	Yes
Audio (L/R) in	4
Composite video in	2
Component video (YPbPr/YCbCr) in	1
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES, DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W

Weight and Dimensions

Depth	330 mm
Width	434 mm
Height	167 mm
Weight	9500 g