Denon AVR-X2400H

You can update the rmware by downloading the latest version with USB ash drive.
2.1. Connecting to the USB ash drive
(1) Preparation
・ Windows PC
・ USB ash drive format : Prepare a USB ash drive formatted in FAT16 or FAT32.
b
We recommend a USB ash drive that has an LED installed.
NOTE :
• Use a memory that supports USB2.0.
• Do not run the USB ash drive through a hub.
• Do not connect a computer to the USB port of this unit using a USB cable.
• Do not use an extension cable when connecting the USB ash drive.
• Save the update le on a blank USB ash drive for use.
• If a USB ash drive cannot be updated, replace it with a different USB ash drive and perform the
update again.
2.2. Unzipping the Downloaded File
Unzip the downloaded le on your computer.
XXXXXXXXXXX xxxxxxxxxx_xxxxxxxx.zip
There are folders or les after unzipping.
Copy these folders or les onto the USB ash drive.
The folders or les must be placed in the root directory of the USB ash drive.
copy to USB flash drive
2. Update preparation with a USB ash drive
162
Caution in
servicing
Electrical Mechanical Repair Information Updating