To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Denon AVR-X2400H and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Frequency range | 20 - 20000 Hz |
| Pre-out channels | 2 SW |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (1KHz@6 Ohm) | 150 W |
| Power output per channel (20-20KHz@8 Ohm) | 95 W |
| Display | VFL |
| HDCP version | 2.2 |
| Apple docking | No |
| Product color | Black |
| Audio decoders | DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround |
| Volume control | Rotary |
| Center speaker impedance | 16 Ω |
| Supported video modes | 720i, 720p, 960p, 1080i, 1080p, 2160p |
| Supported graphics resolutions | 3840 x 2160 |
| HDMI in | 8 |
| Audio (L/R) in | 4 |
| Digital audio coaxial in | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Multichannel audio input type | RCA |
| Component video (YPbPr/YCbCr) in | 2 |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Internet radio services supported | Deezer, Napster, Pandora, SIRIUS Internet Radio, Spotify, Tidal, iHeartRadio |
| Audio formats supported | ALAC, DSD, FLAC, MP3, WAV |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 500 W |
| Headphone connectivity | 3.5 mm |
| Connectivity technology | Wired & Wireless |
| Speakers connectivity type | 3.5mm |
| Certification | CE, EAC |
Weight and Dimensions| Depth | 339 mm |
|---|---|
| Width | 434 mm |
| Height | 167 mm |
| Weight | 9400 g |
