5
With the unit power o, connect the unit and computer
using a USB cable (sold separately).
•For the connection procedure, refer to the “Connecting a PC or
Mac” (vpage21) section.
6
Press X on this unit.
•When the unit power is turned on, the computer automatically
finds and connects to the unit.
7
Press SOURCE to change the input source to “USB-
DAC”.
8
Checking the installed driver
q Click the “Start” button and click “Control Panel” on the
computer.
•The control panel setting list is displayed.
w Click the “Sound” icon.
•The sound menu window is displayed.
e Check that there is a checkmark next to “Default Device”
under “Denon USB Audio” in “Speakers” of the “Playback”
tab.
•When there is a checkmark for a dierent device, click
“Denon USB Audio” and “Set Default”.
To Next Page
Loading...
