To Next PageTo Next PageHow do I eliminate humming noise when tuning into AM station on my Denon DRA-201SA Stereo Receiver?
To address humming noise when tuning into an AM station on your Denon Stereo Receiver: * Try inserting the power plug in the opposite direction to see if the signal carried over the power cord is being modulated by the power supply frequency. * Connect an outdoor antenna.
General| Type | Stereo Receiver |
|---|---|
| Tuning range | FM, MW |
| Power Output | 100 W/ch (8 ohms) |
| Total Harmonic Distortion (THD) | 0.08% |
| Frequency Response | 10 Hz - 100 kHz |
| Input Sensitivity | 150 mV / 47 kOhm |
| Signal-to-Noise Ratio | 100 dB |
| Dimensions | 434 x 151 x 399 mm |
| Weight | 8.1 kg |
| Output | Speaker terminals |
| Speaker load impedance | 8Ω to 16Ω |
Important safety warnings for electrical shock, fire, ventilation, and general appliance care.
Warning to prevent fire or shock hazard by avoiding exposure to rain or moisture.
System operations require stereo audio and system cords to be connected between all components.
Instructions on connecting speaker systems, including impedance and cord connection.
Details of power switch, jacks, dials, buttons, and display on the front panel.
Details of antenna, input, output, speaker, and system connectors on the rear panel.
Details of buttons like RDS, PANEL, and CT display function.
Details on number, power, band, preset, function, sleep, and mode buttons.
Explains system power, dimmer, panel, volume/select, mode, and tuning buttons.
Steps for playback, including power-on, volume adjustment, and sound settings.
Steps for recording, including preparation, starting, and control notes.
Guide to adjusting bass, treble, balance, and loudness settings.
Steps for tuning FM and AM stations, including auto tuning.
Detailed steps for storing AM and FM stations into memory presets.
Steps for tuning in stations stored at preset numbers.
Steps for using RDS functions like PTY Search and RT display.
Search for radio programs by specific program types (PTY).
Detailed steps for setting the timer for automatic power on/off.
Explains the timer function for automatic power on/off and sleep timer.
