47
PRIME 2
Device
• Wi-Fi: This determines whether Wi-Fi connectivity is enabled (On) or disabled (Off). Tap the gear icon to open
the Wi-Fi settings. See Control Center > Wi-Fi for more information about the Wi-Fi menu.
• Time/Date: This displays the current local time and date. Tap Sync Time when connected to the internet to
automatically sync the time.
• Time Zone: Displays the current time zone, formatted as Continent / City.
• Set time zone manually: Enable this setting and then tap the gear icon to manually set your local time zone.
• Track Preview: When active, Track Preview will reveal a play button for each song in the library, allowing the
songs to be auditioned in the cue without loading a song to the deck. Select On or Off.
• Preview Volume: Use this slider to set the volume level of the track preview.
• Screen Brightness: This setting determines the brightness of the main display: Low, Mid, High, or Max.
Mixer
• Playlist Deck Crossfade Time: Use this slider to adjust the amount of crossfade between tracks when using the
playlist deck.
• EQ Type: This setting determines the type of equalization for the Channel EQ knobs. Select Isolate for EQ
bands with infinite cut for full band "kills," or select Norm for EQ bands with limited cut.
• ISO EQ High Xover: When EQ Type is set to Isolate, this setting determines the crossover frequency between
the Mid and High EQ bands, from 1000 to 8000 Hz.
• ISO EQ Low Xover: When EQ Type is set to Isolate, this setting determines the crossover frequency between
the Low and Mid EQ bands, from 100
to 800 Hz.
• Filter Resonance: This setting determines the amount of resonance of the filter, from 0 to 15.
• Filter Extreme Type: This setting determines the effect of the Sweep Filters at the extreme low and high ends.
Select Kill for the filter extremes to end in silence, or select Bleed to allow the extreme end of the filter to play.
• Cue Solo Mode: This setting determines how many channels can be sent to the cue mix. Set to On to have only
one channel at a time in the cue mix, or set to Off to cue multiple channels at a time.
Mic
• Attenuation: This setting determines the amount of additional attenuation for the Microphone Inputs: -20 dB, -
10 dB or 0 dB.
• Send to Booth: This setting determines whether the microphone signal is sent to the booth outputs (On) or not
(Off).
Services
• Lighting: This determines whether SoundSwitch Engine Lighting is enabled (On) or disabled (Off). Tap the gear
icon to open the lighting control interface.
• Sync: This determines whether Ableton Link is enabled (On) or disabled (Off). Ableton Link synchronizes beat,
phase, and tempo of Ableton Live and Ableton Link-enabled applications over a wireless or wired network. You
must be connected to the internet to use Ableton Link.
• Streaming: Use these options to enable or disable connections to streaming service partners. When set to On,
the selected service will be available in the Source menu.
• Cloud: Use this option to retrieve your Engine library database from a cloud storage service. You must first use
the Engine PRIME software to back up your database. Then, when this option is set to On, the selected service
will be available in the Source
menu and you can access these files over an established internet connection.
Note: We recommend using only high-quality, name brand USB 3.0 or Class U1 or U3 SD cards as source
drives, especially when cloud services are enabled.
To Next Page
Loading...
