Denon PRIME 4 - PRIME 4 FX Parameter Details; Echo, Delay, Hall Echo, Ping Pong, Auto Gate

55
FX Parameters
PRIME 4
Echo Parameter
V
alue Range
This effect adds echoes of the original signal. Feedback 0–100
Frequency <60 Hz – <18.2 kHz, All Bands,
>60 Hz – >18.2 kHz
Beats 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 2, 4, 8
Dry/Wet 0–100
Delay Parameter Value Range
This effect adds repeated instances of the original signal
that decay over time.
Frequency <60 Hz – <18.2 kHz, All Bands,
>60 Hz – >18.2 kHz
Beats 1
/
32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 2, 4, 8
Dry/Wet 0–100
Hall Echo Parameter Value Range
This effect adds reverberated echoes of the original signal. Decay 0–100
Frequency <60 Hz – <18.2 kHz, All Bands,
>60 Hz – >18.2 kHz
Beats 1
/
32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 2, 4, 8
Dry/Wet 0–100
Ping Pong Parameter Value Range
This is a stereo delay effect where the rate of delay is
different between the left and right channels.
Pan 0–100 (50 = center)
Frequency <60 Hz – <18.2 kHz, All Bands,
>60 Hz – >18.2 kHz
Beats 1/32, 1
/
16, 1
/
8, 1/4, 1/2, 3/4, 1, 2, 4, 8
Dry/Wet 0–100
A
uto Gate Parameter
V
alue Range
This effect applies level reduction to the original signal at a
regular rate.
Frequency <60 Hz – <18.2 kHz, All Bands,
>60 Hz – >18.2 kHz
Beats 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 2, 4, 8
Dry/Wet 0–100