Denon PRIME 4 - Flanger, Filter LFO, Phaser, and Bit Crush

56
Flanger Parameter Value Range
This effect adds a slightly delayed copy of the original signal
to create a comb-filter effect (often referred to as resembling
a jet plane engine).
Frequency <60 Hz – <18.2 kHz, All Bands,
>60 Hz – >18.2 kHz
Beats 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 2, 4, 8
Dry/Wet 0–100
Filter LFO Parameter
V
alue Range
This effect varies the cutoff frequency at a regular rate. Resonance 0–100
Frequency <60 Hz – <18.2 kHz, All Bands,
>60 Hz – >18.2 kHz
Beats 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 2, 4, 8
Dry/Wet 0–100
Phaser Parameter Value Range
This effect adds a copy of the original signal with its phase
shifted slightly to create a subtle, modulatory effect.
Frequency <60 Hz – <18.2 kHz, All Bands,
>60 Hz – >18.2 kHz
Beats 1/32, 1/16, 1/8, 1/4, 1
/
2, 3
/
4, 1, 2, 4, 8
D
r
y
/
Wet 0–100
Bit Crush Parameter Value Range
This effect applies bit reduction to the original signal for a lo-
fi, down-sampled effect.
AVG 0–100
Frequency <60 Hz – <18.2 kHz, All Bands,
>60 Hz – >18.2 kHz
Bits 8, 16, 32
Dry/Wet 0–100
Roll Parameter Value Range
This effect samples the current audio signal and repeats it at
a regular rate based on the current time division.
Frequency <60 Hz – <18.2 kHz, All Bands,
>60 Hz – >18.2 kHz
Beats 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 2, 4, 8
Dry/Wet 0–100
Rev. Roll Parameter Value Range
This effect (reverse roll) samples the current audio signal
and repeats it backward at a regular rate based on the
current time division.
Frequency <60 Hz – <18.2 kHz, All Bands,
>60 Hz – >18.2 kHz
Beats 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 2, 4, 8
Dry/Wet 0–100