- 75 -
[Note]
Remove the drain to a container and dispose the drain appropriately as Industrial
Waste.
・Confirm there is no leakage after it cleans it in an environmental base.
Ask the nearest office or service factory when you discover the leakage by any
chance.
・Paint after it removes the rust when rust has been found in an environmental base.
＜
Assembly procedure
＞
① Set to store this machine from an environmental base internally, and install the bolt
for uniting.
(3) Cleaning inside of fuel tank
Drain the fuel in the fuel tank completely,
and wash out deposits and water collected
inside the tank.
(4) Replacement of air cleaner element
The element should be replaced referring to ｢9-5.(3) Cleaning of air cleaner element｣.
Parts number of air cleaner element :
To Next Page
Loading...
