SecurAccess Compact – User Guide 24
10. DESCRIPTION
The SecurAccess Compact telephone allows a full handsfree call simply by pressing a button. When
the call is terminated, it will automatically hang up.
The SecurAccess Compact can also activate:
- a door latch relay remotely when entering a stored code
- a dry contact during the conversation for driving an alarm, a camera or any other electrical
appliance.
The SecurAccess Compact has a built-in speaker overboost feature with 10 dB amplification. This
feature requires an optional external power supply complying with CE EN60950-1:2006 BT TRT3
specifications.
The SecurAccess Compact complies with IP 65 weather protection specifications. Moreover, a built-
in heating resistor, requiring the same as above optional external power supply, provides safe and
reliable operations even in very humid environments.
Main features:
1. Calling
1 or 2 programmable off-hook and memory buttons
Chain dialling: automatic dialling of a sequence of pre stored numbers (up to 5 numbers – 22
digits max - can be stored in each button)
Dialling sequence can be automatically repeated in case of busy line or no answer (up to 9
times)
2. Auto answer
An auto answer mode can be activated for calling a party standing close to the SecurAccess
Compact or to enter the remote programming mode.
The SecurAccess Compact will automatically go off-hook after a pre programmed number of
rings :
- From 1 up to 9 rings when automatic off-hook selection is activated
- After 30 rings otherwise. (see section § 4.9)
3. Automatic line disconnection
Automatically when the conversation is over (by busy line tone detection)
When a limited timed conversation has been programmed
4. Door latch activation
NO/NC driving contact for a remote activation of a door latch electrical relay.
Selectable activation duration (from 1 up to 9 seconds)
Choice of 1 up to 6 four digits codes.
5. Local or remote programming
Local programming requires opening the unit.
Remote programming needs to call the SecurAccess Compact using a DTM (tone) telephone.
6. Dialling Mode
Tone (DTMF) or Pulse (66/33 or 60/40 mark break ratio)
7. Conversation timer
Choice of unlimited or timed conversation (from 1 up to 9 minutes)
To Next Page
Loading...
