Depaepe Telecom SecurAccess Compact - Table for Parameters Settings

SecurAccess Compact – User Guide 40
14. Table for parameters settings
Setting to modify Code Setting choice
Factory settings are shown in grey
Conf.
Dialling mode 0 0 Pulse : 0 – Tone : 1 *9
Pulse dialling 0 1 Pulse 66/33 ms : 0 60/40 ms : 1 *9
Ringer level 0 3 Low : 0 - High : 1 *9
Ringer melody 0 4 0 : ringer off
1 : Melody N°1
2 : Melody N°2
3 : Melody N°3
*9
Auto answer 0 5 Enter the number of rings before auto answer (0 up to 9)
Note: 0 = feature deactivated
3 = factory setting
*9
Loudspeaker volume 0 6 Low : 0 – Medium : 1 – High : 2 *9
Talk time duration 0 7 Enter the number of minutes of talk time (from 0 up to 9).
Note : 0 = no limit (factory setting)
*9
Elapsed time before next call 0 8 0 : 10 seconds
1 : 20 seconds
2 : 35 seconds (factory setting)
3 : 1 minute
4 : 5 minutes
*9
Repeated dial 0 9 Enter 0 up to 9 (0 for no repeated dial),
note: factory setting = 0
*9
Number 1 Key n°1 (mandatory) 2 0 Number to store (* # = pause) (22 digits max)
Note : no digit entered erases a previous stored number
*9
Number 2 for chain dialling on key n°1 2 1 Number to store (* # = pause) (22 digits max)
Note : no digit entered erases a previous stored number
*9
Number 3 for chain dialling on key n°1 2 2 Number to store (* # = pause) (22 digits max)
Note : no digit entered erases a previous stored number
*9
Number 4 for chain dialling on key n°1 2 3 Number to store (* # = pause) (22 digits max)
Note : no digit entered erases a previous stored number
*9
Number 5 for chain dialling on key n°1 2 4 Number to store (* # = pause) (22 digits max)
Note : no digit entered erases a previous stored number
*9
Number 1 Key n°2 (mandatory) 2 5 Number to store (* # = pause) (22 digits max)
Note : no digit entered erases a previous stored number
*9
Number 2 for chain dialling on key n°2 2 6 Number to store (* # = pause) (22 digits max)
Note : no digit entered erases a previous stored number
*9
Number 3 for chain dialling on key n°2 2 7 Number to store (* # = pause) (22 digits max)
Note : no digit entered erases a previous stored number
*9
Number 4 for chain dialling on key n°2 2 8 Number to store (* # = pause) (22 digits max)
Note : no digit entered erases a previous stored number
*9
Number 5 for chain dialling on key n°2 2 9 Number to store (* # = pause) (22 digits max)
Note : no digit entered erases a previous stored number
*9
Door latch activation 6 0 0 : activated (factory setting)
1 : deactivated (Door latch not active)
*9
Activation duration 6 1 Enter the number of seconds (from 1 up to 9 seconds).
factory setting = 2 seconds
*9
1
st
access code 6 2 Enter a 4 digits code, (0000 not allowed) *9
2
nd
access code 6 3 Enter a 4 digits code, (0000 not allowed) *9
3
rd
access code 6 4 Enter a 4 digits code, (0000 not allowed) *9
4
th
access code 6 5 Enter a 4 digits code, (0000 not allowed) *9
5
th
access code 6 6 Enter a 4 digits code, (0000 not allowed) *9
6
th
access code 6 7 Enter a 4 digits code, (0000 not allowed) *9
Fast opening with « 0# » ou « 0* » 6 8 0 = deactivation (factory setting) - 1 = activation *9
Changing the setting code 9 0 Enter the new 4 digits access code twice
note : 0000 = factory setting
*9
switches back the unit to all factory settings 9 1 Four digits access codes *9
Immediate on Hook 9 9 Close the connection after validation
NB : When storing a number in the memory key , combination of key * # insert a pause (generally used with a PBX).