LBB Series Oven Owner’s Manual APPENDICES
Version 13 57
Copyright © 2011 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
8.2.2. Timer Option
Use the timer option to count down in hours toward powering the heater OFF (Figure 25).
When the timer is ON, the
delayed contact remains closed
allowing power to the heater.
The range display increments
from 0 and the Timing LED
blinks slowly. When the preset
value is reached and the timing
cycle is complete, the Timing
LED blinks rapidly and the
delayed contact opens and shuts
off the heater. The heater remains
off until either the TIMER switch
is turned OFF, or reset.
Range and Decimal Point
Switches are available only when
the Time is not mounted in the
panel, to discourage tampering.
Actual timer may vary from the model pictured (Figure 25).
8.2.2.1. Operating the Timer
1. Rotate each knob to the desired time setting.
2. Turn the Timer Switch to ON. The timer is now incrementing from 0 to the desired
setting.
3. Set the HEATER switch to ON, if not already ON.
4. When the timer reaches the preset value, the heater shuts OFF.
5. To reset the timer, set the Timer Switch OFF then to ON.
6. To manually control the time, set Timer Switch OFF.
Figure 25. Timer Option Displays and Switches.
To Next Page
Loading...
Need help?
General
