Devatec ElectroVap - User Information Menu (Status Details)

ELECTROVAP® ELMC
37
WATER TEMP. IN
CYLINDER XX°C
TEMP.(°C) SENSOR
NOT CONNECTED
If function enabled
If the temperature exceeds 105 °C
STEAM DEMAND
XX%
STEAM DEMAND
NO DEMAND
Check
SAFETY SWITCH
SAFETY SWITCH
(1-2) OPEN
Standard functioning
If demand is zero
If safety switch open & steam
demand on
If in an HR probe
NO DEMAND
MODBUS STOP
If the stop is prompted by the
Modbus
DRAINING AFTER
XX H STOP
PRODUCT BEFORE CLEAN
XXX KG
NEXT SERVICE
DUE XXXH
HOUR METER
XX H
STEAM METER
XX KG