Installing the printer driver
4
ineo 160 4-15
7 Click [Browse], select the folder on the CD-ROM, and then click [Open].
– If Windows 2000 is being used, select “Driver\(language)\2k_XP”.
Select the language you prefer. For example, if you prefer English,
browse to: Driver\English\2k_XP.
– If Windows NT 4.0 is being used, select “Driver\(language)\WinNT”.
Select the language you prefer. For example, if you prefer English,
browse to: Driver\English\WinNT.
8 Click [Open] again, and then click [OK].
9 Select the printer to be installed, and then click [Next].
10 Continue selecting the appropriate settings according to your printer
setup and clicking [Next] until [Finish] appears.
11 Click [Finish].
Installing the printer driver using the “Add Printer Wizard” under Win-
dows Me/98 SE/98
1 With Windows running, insert the CD-ROM into the CD-ROM drive of
your computer.
2 Click the Windows [Start] button, point to [Settings], and then click
[Printers].
The “Printers” window appears.
3 Double-click the “Add Printer” icon.
The “Add Printer Wizard” starts.
4 Click [Next].
5 Select Local printer, and then click [Next].
6 Click [Have Disk].
7 In Folder, select “Driver\(language)\Win9x” on the CD-ROM, and then
click [OK]. Select the language you prefer. For example, if you prefer
English, browse to: Driver\English\Win9x.
8 Click [OK].
Click [OK] again.
To Next Page
Loading...
