Develop ineo 160 - Paper Source; Media Type

Configuring printer driver settings
5
ineo 160 5-13
5.3.3 Paper Source
Click the down arrow button, and then select the tray from which paper
should be fed.
Selecting “Auto” tells the machine to use the tray that contains paper of the
size specified under Output Paper Size on the “Paper” tab.
2
Note
If the optional paper feed unit is installed, “Tray 2” appears. For details,
refer to ““Device Options” tab” on page 5-19. In addition, only A4- or Let-
ter-size plain paper can be loaded into Tray 2.
5.3.4 Media Type
Click the down arrow button, and then select the type of media to be used
for printing.
2
Note
If “Auto” is selected in the Paper Source box, the Media Type setting
cannot be changed.