What to do if my Develop ineo 3320 Printer says 'Fax partition inoperative'?
If your Develop Printer displays the message 'Fax partition inoperative', turn the printer off, and then turn it back on. If the message appears again, then contact your system support person.
What to do if my Develop ineo 3320 says 'Cartridge low'?
If your Develop Printer indicates that the cartridge is low, you may need to order a toner cartridge. If necessary, select Continue on the printer control panel to clear the message and continue printing.
What to do if my Develop ineo 3320 Printer says 'Imaging unit low'?
If your Develop Printer indicates that the imaging unit is low, you may need to order a new one. If necessary, select Continue on the printer control panel to clear the message and continue printing.
What to do when my Develop ineo 3320 Printer says 'Replace imaging unit, 0 estimated pages remain'?
If your Develop Printer displays the message 'Replace imaging unit, 0 estimated pages remain', replace the imaging unit to clear the message and continue printing.
How to fix 'Replace cartridge, printer region mismatch' error on Develop Printer?
To fix the 'Replace cartridge, printer region mismatch' error on your Develop Printer, install a toner cartridge that matches the region number of the printer.
What to do if my Develop ineo 3320 says 'Not enough free space in flash memory for resources'?
If your Develop Printer displays the message 'Not enough free space in flash memory for resources', upgrade to a larger capacity flash memory card.
What to do if my Develop Printer says 'Unformatted flash detected'?
If your Develop Printer displays the message 'Unformatted flash detected', format the flash memory.
How to resolve 'Insufficient memory for Flash Memory Defragment operation' error on Develop ineo 3320?
To resolve the 'Insufficient memory for Flash Memory Defragment operation' error on your Develop Printer, install additional printer memory.
What to do if Develop ineo 3320 prompts to change paper source?
If your Develop Printer prompts you to change the paper source, load the correct size and type of paper in the tray. Then, verify that the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper.
How to fix 'Close front door' message on Develop Printer?
To resolve the 'Close front door' message on your Develop Printer, simply close the front door of the printer.
General| Print Speed (A4) | Up to 33 ppm |
|---|---|
| Print Resolution | 1, 200 x 1, 200 dpi |
| Weight | Approx. 20.1 kg |
| Scan resolution | 600 x 600 dpi |
| Printable paper weight | 60 - 220 gsm |
| Duplex Printing | Yes |
| Type | Multifunction Printer |
| Connectivity | USB 2.0, Ethernet, Wi-Fi |
| Page description language | PCL 6, PostScript 3 |
| Fax standard | Super G3 |
| Interface | USB 2.0, Ethernet, Wi-Fi |
| Printable paper size | A4, A5, Legal, Letter |
| Network Connectivity | Ethernet, Wi-Fi |
| Operating System Compatibility | Windows, macOS, Linux |
To Next Page
