Develop ineo 3320 - Assigning a Custom Paper Type Name

User's Guide
- 49 -
2. Select a custom name, and then type a new custom paper type name.
3. Press
.
4. Press Custom Types, and then verify if the new custom paper type name has replaced the custom
name.
Assigning a custom paper type name
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address
appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu >Custom Names.
3. Type a name for the paper type, and then click Submit.
4. Select a custom type, and then verify that the correct paper type is associated with the custom name.
Note: Plain Paper is the factory default paper type for all user-defined custom names.
Assigning a custom paper type
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address
appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu >Custom Types.
3. Select a custom paper type name, and then select a paper type.
Note: Paper is the factory default paper type for all user-defined custom names.
4. Click Submit.