User's Guide
- 67 -
Copying on specialty media
Copying on transparencies
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the printer control panel, navigate to:
>Copy > >Copy from > select the size of the original document
4. Navigate to:
Copy to >
> select the tray containing the transparencies > > select the number of copies or
enter a number on the keypad >
5. If there are no trays that contain transparencies, then do the following:
a. Navigate to:
Copy to >
>Manual Feeder > > select the size of the transparencies >
>Transparency >
b. Load transparencies into the multipurpose feeder, and then press
.
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
.
6. Press the left or right arrow button to scroll to Finish the Job, and then press
.
Copying on letterhead
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
To Next Page
Loading...
