Develop ineo 3320 - Adjusting the Brightness of the Printer Display; Using Schedule Power Modes

User's Guide
- 180 -
3. Press the arrow buttons until Hibernate appears, and then press
.
Notes:
• When Press Sleep Button is set to Hibernate, a short press of the Sleep button sets the printer to
Hibernate mode.
• When Press and Hold Sleep Button is set to Hibernate, a long press of the Sleep button sets the
printer to Hibernate mode.
Adjusting the brightness of the printer display
To save energy, or if you have trouble reading the display, adjust its brightness settings.
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address
appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >General Settings.
3. In the Screen Brightness field, enter the brightness percentage you want for the display.
4. Click Submit.
Using Schedule Power Modes
Schedule Power Modes lets the user schedule when the printer goes into a reduced power state or into
the Ready state.
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address
appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >General Settings >Schedule Power Modes.
3. From the Action menu, select the power mode.
4. From the Time menu, select the time.
5. From the Day(s) menu, select the day or days.
6. Click Add.