Develop ineo 3320 - Solving Printer Problems

User's Guide
- 224 -
5. Turn the printer back on.
Unformatted flash detected [53]
Try one or more of the following:
• From the printer control, select Continue to stop the defragmentation and continue printing. For non-
touch-screen printer models, press
to confirm.
• Format the flash memory.
Note: If the error message remains, then the flash memory may be defective and need to be replaced.
Weblink server not set up. Contact system administrator.
Select Continue to clear the message. For non-touch-screen printer models, press to confirm.
Note: If the message appears again, then contact your system support person.
Solving printer problems
• Basic printer problems
• Hardware and internal option problems
• Paper feed problems
Basic printer problems
The printer is not responding
Action
Yes
No
Step 1
Make sure the printer is turned on.
Is the printer turned on?
Go to step 2.
Turn on the printer.
Step 2
Check if the printer is in Sleep mode or
Hibernate mode.
Is the printer in Sleep mode or Hibernate
mode?
Press the Sleep button to wake the
printer from Sleep mode or Hibernate
mode.
Go to step 3.