Develop ineo 3320 - Copy Settings Menu

User's Guide
- 138 -
Copy Settings menu
Use
To
Content Type
Text
Graphics
Text/Photo
Photo
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Content Source
Black/White Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Specify whether an original document is two-sided (duplex) or one-sided, and
then specify whether the copy should be two-sided or one-sided.
Notes:
• 1 sided to 1 sided—The original document has print on one side and the
copy will also have print on one side.
• 1 sided to 2 sided—The original document has print on one side, while the
copy will have print on both sides.
• 2 sided to 1 sided—The original document has print on both sides, while
the copy will have print on just one side.
• 2 sided to 2 sided—The original document has print on both sides, and the
copy will also have print on both sides.
• Duplex scanning is not available on selected printer models.
Paper Saver
Off
2-up Portrait
2-up Landscape
4-up Portrait
4-up Landscape
Copy two or four sheets of a document on one page.
Note: Off is the factory default setting.