User's Guide
- 137 -
Page Protect
Off
On
Let the printer successfully print a page that may not have
printed otherwise.
Notes:
• Off is the factory default setting. This prints a partial page
when there is not enough memory to print the whole page.
• On sets the printer to process the whole page so that the
entire page prints.
Do nothing
Sleep
Hibernate
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Press and Hold Sleep Button
Do nothing
Sleep
Hibernate
Determine how the printer, while in idle state, reacts to a long
press of the Sleep button.
Note: “Do nothing” is the factory default setting.
Do Not Restore
Restore Now
Return the printer settings to the factory default settings.
Notes:
• Do Not Restore is the factory default setting. This keeps
the user-defined settings.
• Restore Now returns all scanner settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in the RAM are deleted.
Off
IP Address
Hostname
Contact Name
Location
Zero Configuration Name
Custom Text [x]
Create a custom home message that appears during
warnings, printer errors and the Home Prime/Status state.
Notes:
• The maximum number of characters for a custom
message is 40 (NV 80 bytes). If the custom message
requires more than 2 lines, then normal scrolling behavior
will occur.
• When the Home Prime/Status has a custom message and
there is a warning with custom message, the Home
Prime/Status condition is shown first.
To Next Page
Loading...
