Develop ineo 3320 - Printing a Menu Settings Page; Printing a Network Setup Page

User's Guide
- 37 -
• Network setup page—If your printer has networking support, then use this page to verify that the
network connection is working. This page also provides important information that aids network
printing configuration.
Printing a menu settings page
Print a menu settings page to view the current menu settings and to verify if the printer options are
installed correctly.
From the printer control panel, navigate to:
>Settings >Reports > >Menu Settings Page >
Note: If you have not changed any menu settings, then the menu settings page lists all the factory default
settings. Settings saved from the menus replace the factory default settings as user default settings. A
user default setting remains in effect until you access the menu again, select another value, and save it.
Printing a network setup page
If the printer is attached to a network, then print a network setup page to verify the network connection.
This page also provides important information that aids network printing configuration.
1. From the printer control panel, navigate to:
>Settings >Reports > >Network Setup Page >
Note: If an optional internal print server is installed, then Print Network [x] Setup Page
appears.
2. Check the first section of the network setup page, and confirm that the status is Connected.
If the status is Not Connected, then the LAN drop may not be active, or the network cable may be
malfunctioning. Consult your system support person for a solution, and then print another network
setup page.