Develop ineo 3320 - Printer Configurations

User's Guide
- 13 -
1
Right side
110 mm (4.33 in.)
2
Front
305 mm (12 in.)
3
Left side
65 mm (2.56 in.)
4
Rear
100 mm (3.94 in.)
5 Top 540 mm (21.26 in.)
Printer configurations
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for
stability. You must use either a printer stand or printer base if you are using a high-capacity tray and an
input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans,
copies, and faxes, you may need additional furniture.
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray
separately. Keep all other trays closed until needed.
You can configure your printer by adding one optional 250- or 550-sheet tray. For instructions on
installing the optional tray, see
Installing optional trays.