User's Guide
- 61 -
Adjusting toner darkness
Using the Embedded Web Server
1. Open a Web browser, and then type the IP address of the printer in the address field.
Notes:
- View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address
appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Print Settings >Quality Menu >Toner Darkness.
3. Adjust the toner darkness, and then click Submit.
Using the printer control panel
1. From the printer control panel, navigate to:
>Settings > >Print Settings > >Quality Menu > >Toner Darkness
2. Adjust the toner darkness, and then press
.
Printing confidential and other held jobs
Storing print jobs in the printer
1. From the printer control panel, navigate to:
>Settings > >Security > >Confidential Print > select the print job type
Limits the number of times an invalid PIN can be entered.
Note: When the limit is reached, the print jobs for that user name and PIN
are deleted.
Confidential Job Expiration Lets you hold print jobs in the computer until you enter the PIN from the
printer control panel.
Note: The PIN is set from the computer. It must be four digits, using the
numbers 0–9.
Lets you print and store print jobs in the printer memory for reprinting.
Lets you print one copy of a print job while the printer holds the remaining
copies. It allows you to examine if the first copy is satisfactory. The print
job is automatically deleted from the printer memory once all copies are
printed.
To Next Page
Loading...
