Develop ineo 3320 - Network Card Menu

User's Guide
- 122 -
Reports menu
To access the menu, navigate to either of the following:
• Network/Ports >Standard Network >Standard Network Setup >Reports
• Network/Ports >Network [x] >Network [x] Setup >Reports
Use
To
Print Setup
Page
Print a report containing information about the network printer settings, such as the TCP/IP
address.
Network Card menu
To access the menu, navigate to either of the following:
• Network/Ports >Standard Network >Standard Network Setup >Network Card
• Network/Ports >Network [x] >Network [x] Setup >Network Card
Use
To
View Card Status
Connected
Disconnected
View the connection status of the network card.
View Card Speed
View the speed of an active network card.
Network Address
UAA
LAA
View the network addresses.
Job Timeout
0–255 seconds
Set the amount of time it takes for a network print job to be canceled.
Notes:
• 90 seconds is the factory default setting.
• A setting value of 0 disables the timeout.
• If a value of 1–9 is selected, then the setting is saved as 10.