Develop ineo 3320 - Print Is too Dark

User's Guide
- 250 -
Print is too dark
Action
Yes
No
Step 1
1. From the Quality menu on the printer
control panel, reduce the toner
darkness.
Note: 8 is the factory default setting.
2. Resend the print job.
Is the print still too dark?
Go to step 2.
The problem is solved.
Step 2
1. From the printer control panel, set
the paper type, texture and weight in
the Paper menu to match the paper
loaded in the tray.
2. Resend the print job.
Is the tray set to the type, texture, and
weight of the paper loaded?
Go to step 3.
Do one or more of the following:
• Specify the paper type,
texture, and weight from the
tray settings to match the
paper loaded in the tray.
• Change the paper loaded in
the tray to match the paper
type, texture and weight
specified in the tray settings.
Step 3
1. Depending on your operating
system, specify the paper type,
texture and weight from Printing
Preferences or from the Print dialog.
2. Resend the print job.
Is the print still too dark?
Go to step 4.
The problem is solved.